HDD Samsung HD250HJ Жёсткий диск 250Гб

Как донор, либо под использование если вы плохой парень и любите риск 😁

По блиц-цене доставка бесплатно!

Информация по SMART:

smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-141-generic] (local build)

Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===

Model Family: SAMSUNG SpinPoint S250

Device Model: SAMSUNG HD250HJ

Serial Number: S0URJADPB23819

LU WWN Device Id: 5 0000f0 0abb23819

Firmware Version: FH100-05

User Capacity: 250 059 350 016 bytes [250 GB]

Sector Size: 512 bytes logical/physical

Device is: In smartctl database [for details use: -P show]

ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b

Local Time is: Fri Jan 4 12:16:57 2019 +07

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

General SMART Values:

Offline data collection status: (0x04) Offline data collection activity

was suspended by an interrupting command from host.

Auto Offline Data Collection: Disabled.

Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever

been run.

Total time to complete Offline

data collection: ( 3654) seconds.

Offline data collection

capabilities: (0x5b) SMART execute Offline immediate.

Auto Offline data collection on/off support.

Suspend Offline collection upon new

command.

Offline surface scan supported.

Self-test supported.

No Conveyance Self-test supported.

Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode.

Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

General Purpose Logging supported.

Short self-test routine

recommended polling time: ( 2) minutes.

Extended self-test routine

recommended polling time: ( 61) minutes.

SCT capabilities: (0x003f) SCT Status supported.

SCT Error Recovery Control supported.

SCT Feature Control supported.

SCT Data Table supported.

SMART Attributes Data Structure revision number: 16

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE

1 Raw_Read_Error_Rate 0x000f 100 096 051 Pre-fail Always - 0

3 Spin_Up_Time 0x0007 253 253 025 Pre-fail Always - 4352

4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3675

5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0

7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0

8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0

9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 13182

10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0

11 Calibration_Retry_Count 0x0012 253 253 000 Old_age Always - 0

12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1860

13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 1257080

184 End-to-End_Error 0x0033 253 253 099 Pre-fail Always - 0

187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1648386

188 Command_Timeout 0x0032 253 253 000 Old_age Always - 0

190 Airflow_Temperature_Cel 0x0022 166 118 000 Old_age Always - 24 (Min/Max 12/40)

194 Temperature_Celsius 0x0022 157 115 000 Old_age Always - 27 (Min/Max 12/41)

195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 1257080

196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0

197 Current_Pending_Sector 0x0012 253 089 000 Old_age Always - 0

198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0

199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 446

200 Multi_Zone_Error_Rate 0x000a 253 100 000 Old_age Always - 0

201 Soft_Read_Error_Rate 0x000a 253 077 000 Old_age Always - 0

202 Data_Address_Mark_Errs 0x0032 097 097 000 Old_age Always - 999

SMART Error Log Version: 1

ATA Error Count: 4631 (device log contains only the most recent five errors)

CR = Command Register [HEX]

FR = Features Register [HEX]

SC = Sector Count Register [HEX]

SN = Sector Number Register [HEX]

CL = Cylinder Low Register [HEX]

CH = Cylinder High Register [HEX]

DH = Device/Head Register [HEX]

DC = Device Command Register [HEX]

ER = Error register [HEX]

ST = Status register [HEX]

Powered_Up_Time is measured from power on, and printed as

DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,

SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 4631 occurred at disk power-on lifetime: 12768 hours (532 days + 0 hours)

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

40 51 00 e0 28 00 e0 Error: UNC at LBA = 0x000028e0 = 10464

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

c8 00 00 e0 28 00 e0 00 00:17:53.438 READ DMA

ec 00 00 00 00 00 a0 00 00:17:48.313 IDENTIFY DEVICE

ef 03 46 00 00 00 a0 00 00:17:48.313 SET FEATURES [Set transfer mode]

ec 00 00 00 00 00 a0 00 00:17:48.313 IDENTIFY DEVICE

Error 4630 occurred at disk power-on lifetime: 12768 hours (532 days + 0 hours)

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

40 51 00 e0 28 00 e0 Error: UNC at LBA = 0x000028e0 = 10464

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

c8 00 00 e0 28 00 e0 00 00:17:48.250 READ DMA

ec 00 00 00 00 00 a0 00 00:17:42.750 IDENTIFY DEVICE

ef 03 46 00 00 00 a0 00 00:17:42.750 SET FEATURES [Set transfer mode]

ec 00 00 00 00 00 a0 00 00:17:42.750 IDENTIFY DEVICE

Error 4629 occurred at disk power-on lifetime: 12768 hours (532 days + 0 hours)

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

40 51 00 e0 28 00 e0 Error: UNC at LBA = 0x000028e0 = 10464

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

c8 00 00 e0 28 00 e0 00 00:17:42.688 READ DMA

ec 00 00 00 00 00 a0 00 00:17:39.500 IDENTIFY DEVICE

ef 03 46 00 00 00 a0 00 00:17:39.500 SET FEATURES [Set transfer mode]

ec 00 00 00 00 00 a0 00 00:17:39.500 IDENTIFY DEVICE

Error 4628 occurred at disk power-on lifetime: 12768 hours (532 days + 0 hours)

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

40 51 00 e0 28 00 e0 Error: UNC at LBA = 0x000028e0 = 10464

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

c8 00 00 e0 28 00 e0 00 00:17:39.438 READ DMA

ec 00 00 00 00 00 a0 00 00:17:33.938 IDENTIFY DEVICE

ef 03 46 00 00 00 a0 00 00:17:33.938 SET FEATURES [Set transfer mode]

ec 00 00 00 00 00 a0 00 00:17:33.938 IDENTIFY DEVICE

Error 4627 occurred at disk power-on lifetime: 12768 hours (532 days + 0 hours)

When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:

ER ST SC SN CL CH DH

-- -- -- -- -- -- --

40 51 00 e0 28 00 e0 Error: UNC at LBA = 0x000028e0 = 10464

Commands leading to the command that caused the error were:

CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name

-- -- -- -- -- -- -- -- ---------------- --------------------

c8 00 00 e0 28 00 e0 00 00:17:33.875 READ DMA

ec 00 00 00 00 00 a0 00 00:17:31.000 IDENTIFY DEVICE

ef 03 46 00 00 00 a0 00 00:17:31.000 SET FEATURES [Set transfer mode]

ec 00 00 00 00 00 a0 00 00:17:31.000 IDENTIFY DEVICE

SMART Self-test log structure revision number 1

Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error

# 1 Short offline Completed without error 00% 12771 -

# 2 Short offline Completed: read failure 90% 12739 10559

# 3 Extended offline Completed: read failure 90% 12739 10559

# 4 Extended offline Completed: read failure 90% 12574 3694815

# 5 Short offline Completed: read failure 90% 12574 3694815

# 6 Short offline Completed: read failure 90% 12570 3694815

# 7 Short offline Completed: read failure 90% 12570 3694815

SMART Selective self-test log data structure revision number 0

Note: revision number not 1 implies that no selective self-test has ever been run

SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS

1 0 0 Not_testing

2 0 0 Not_testing

3 0 0 Not_testing

4 0 0 Not_testing

5 0 0 Not_testing

Selective self-test flags (0x0):

After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.